Truck Safety Rules in India: Braking and Blind-Spot Systems Due in 2027–28

Guide / Explainer — 17 November 2026. India’s commercial-vehicle safety requirements are changing over the next two years. For fleet operators, the important distinction is between requirements already applicable and those with future effective dates. The Ministry of Road Transport and Highways (MoRTH) detailed these measures in a 12 February 2026 parliamentary response published by PIB. This article explains what that official response says and what operators should check before purchasing or specifying trucks.
What changes on 1 October 2027?
According to MoRTH, the revised braking standard IS 11852:2019 is mandated for trucks from 1 October 2027, under GSR 834(E) dated 11 November 2025. The ministry also identifies electronic stability control (ESC) and advanced emergency braking systems (AEBS) under AIS 162 with the same effective date for trucks. ESC helps a vehicle maintain stability, especially during demanding manoeuvres; AEBS can automatically apply braking when the driver does not react to a detected hazard in time. These technologies assist drivers but do not eliminate stopping-distance or collision risks.
What changes on 1 January 2028?
MoRTH says Blind Spot Information System (BSIS), AIS 186, and Moving Off Information System (MOIS), AIS 187, become mandatory from 1 January 2028. These systems are intended to improve awareness of vulnerable road users near large vehicles, including pedestrians and cyclists. They are particularly relevant when a heavy vehicle turns or begins moving from a stop. The precise vehicle applicability and certification requirements must be checked against the notified rules and homologation documentation, rather than assuming every older vehicle must be retrofitted on the same date.
What truck owners and fleet managers should do
- When ordering a new truck, ask the manufacturer for a written specification identifying the applicable AIS and IS standards and the vehicle’s certification status.
- Check the manufacturing and registration dates against the notified implementation provisions; do not rely solely on a sales brochure.
- Train drivers to understand warning indicators, sensor limitations, safe following distances and the continued need for mirror checks.
- Keep braking, tyre, sensor and electrical systems maintained; a dashboard warning should prompt inspection by an authorised service provider.
- Review insurance, permit and fitness documentation separately. Electronic safety equipment does not replace legal fitness obligations.
Why blind-spot safety matters on highways
A truck’s size can conceal road users close to its sides or front. BSIS and MOIS are intended to provide additional warning information, but safe lane changes, lower speeds near junctions and attentive observation remain essential. Fleet safety policies should cover driver training as well as equipment procurement. See our truck overloading and weighbridge guide for a separate compliance issue, and the highway accident reporting guide for incident-response information.
Does this mean every truck needs retrofitting now?
No blanket retrofit instruction should be inferred from the ministry’s summary. Whether a requirement applies to a particular vehicle depends on the legal notification, its scope and the relevant vehicle type and manufacture date. Operators should verify details with MoRTH notifications and their vehicle manufacturer or registering authority. For broader highway travel information, visit our national highway maintenance coverage.
Official source and status
PIB / Ministry of Road Transport and Highways: Mandatory Safety Devices for Heavy Commercial Vehicles, 12 February 2026. This is an explanatory guide based on an existing official statement, not a claim that a new notification was issued today. Future effective dates should be checked again before purchase or compliance decisions.








